F02C 1/00
|
Gas-turbine plants characterised by the use of hot gases or unheated pressurised gases, as the working fluid |
F02C 1/02
|
Gas-turbine plants characterised by the use of hot gases or unheated pressurised gases, as the working fluid the working fluid being an unheated pressurised gas |
F02C 1/04
|
Gas-turbine plants characterised by the use of hot gases or unheated pressurised gases, as the working fluid the working fluid being heated indirectly |
F02C 1/05
|
Gas-turbine plants characterised by the use of hot gases or unheated pressurised gases, as the working fluid the working fluid being heated indirectly characterised by the type or source of heat, e.g. using nuclear or solar energy |
F02C 1/06
|
Gas-turbine plants characterised by the use of hot gases or unheated pressurised gases, as the working fluid the working fluid being heated indirectly characterised by the type or source of heat, e.g. using nuclear or solar energy using reheated exhaust gas |
F02C 1/08
|
Semi-closed cycles |
F02C 1/10
|
Closed cycles |
F02C 3/00
|
Gas-turbine plants characterised by the use of combustion products as the working fluid |
F02C 3/02
|
Gas-turbine plants characterised by the use of combustion products as the working fluid using exhaust-gas pressure in a pressure exchanger to compress combustion-air |
F02C 3/04
|
Gas-turbine plants characterised by the use of combustion products as the working fluid having a turbine driving a compressor |
F02C 3/05
|
Gas-turbine plants characterised by the use of combustion products as the working fluid having a turbine driving a compressor having compressor and turbine passages in a single rotor the compressor and the turbine being of the radial flow type |
F02C 3/06
|
Gas-turbine plants characterised by the use of combustion products as the working fluid having a turbine driving a compressor the compressor comprising only axial stages |
F02C 3/08
|
Gas-turbine plants characterised by the use of combustion products as the working fluid having a turbine driving a compressor the compressor comprising at least one radial stage |
F02C 3/09
|
Gas-turbine plants characterised by the use of combustion products as the working fluid having a turbine driving a compressor the compressor comprising at least one radial stage of the centripetal type |
F02C 3/10
|
Gas-turbine plants characterised by the use of combustion products as the working fluid having a turbine driving a compressor with another turbine driving an output shaft but not driving the compressor |
F02C 3/13
|
Gas-turbine plants characterised by the use of combustion products as the working fluid having a turbine driving a compressor having variable working fluid interconnections between turbines or compressors or stages of different rotors |
F02C 3/14
|
Gas-turbine plants characterised by the use of combustion products as the working fluid characterised by the arrangement of the combustion chamber in the plant |
F02C 3/16
|
Gas-turbine plants characterised by the use of combustion products as the working fluid characterised by the arrangement of the combustion chamber in the plant the combustion chambers being formed at least partly in the turbine rotor |
F02C 3/20
|
Gas-turbine plants characterised by the use of combustion products as the working fluid using a special fuel, oxidant, or dilution fluid to generate the combustion products |
F02C 3/22
|
Gas-turbine plants characterised by the use of combustion products as the working fluid using a special fuel, oxidant, or dilution fluid to generate the combustion products the fuel or oxidant being gaseous at standard temperature and pressure |
F02C 3/24
|
Gas-turbine plants characterised by the use of combustion products as the working fluid using a special fuel, oxidant, or dilution fluid to generate the combustion products the fuel or oxidant being liquid at standard temperature and pressure |
F02C 3/26
|
Gas-turbine plants characterised by the use of combustion products as the working fluid using a special fuel, oxidant, or dilution fluid to generate the combustion products the fuel or oxidant being solid or pulverulent, e.g. in slurry or suspension |
F02C 3/28
|
Gas-turbine plants characterised by the use of combustion products as the working fluid using a special fuel, oxidant, or dilution fluid to generate the combustion products the fuel or oxidant being solid or pulverulent, e.g. in slurry or suspension using a separate gas producer for gasifying the fuel before combustion |
F02C 3/30
|
Adding water, steam or other fluids to the combustible ingredients or to the working fluid before discharge from the turbine |
F02C 3/32
|
Inducing air flow by fluid jet, e.g. ejector action |
F02C 3/34
|
Gas-turbine plants characterised by the use of combustion products as the working fluid with recycling of part of the working fluid, i.e. semi-closed cycles with combustion products in the closed part of the cycle |
F02C 3/36
|
Open cycles |
F02C 3/045
|
Gas-turbine plants characterised by the use of combustion products as the working fluid having a turbine driving a compressor having compressor and turbine passages in a single rotor |
F02C 3/055
|
Gas-turbine plants characterised by the use of combustion products as the working fluid having a turbine driving a compressor the compressor being of the positive-displacement type |
F02C 3/067
|
Gas-turbine plants characterised by the use of combustion products as the working fluid having a turbine driving a compressor the compressor comprising only axial stages having counter-rotating rotors |
F02C 3/073
|
Gas-turbine plants characterised by the use of combustion products as the working fluid having a turbine driving a compressor the compressor comprising only axial stages the compressor and turbine stages being concentric |
F02C 3/107
|
Gas-turbine plants characterised by the use of combustion products as the working fluid having a turbine driving a compressor with two or more rotors connected by power transmission |
F02C 3/113
|
Gas-turbine plants characterised by the use of combustion products as the working fluid having a turbine driving a compressor with two or more rotors connected by power transmission with variable power transmission between rotors |
F02C 5/00
|
Gas-turbine plants characterised by the working fluid being generated by intermittent combustion |
F02C 5/02
|
Gas-turbine plants characterised by the working fluid being generated by intermittent combustion characterised by the arrangement of the combustion chamber in the plant |
F02C 5/04
|
Gas-turbine plants characterised by the working fluid being generated by intermittent combustion characterised by the arrangement of the combustion chamber in the plant the combustion chambers being formed at least partly in the turbine rotor |
F02C 5/06
|
Gas-turbine plants characterised by the working fluid being generated by intermittent combustion the working fluid being generated in an internal-combustion gas generator of the positive-displacement type having essentially no mechanical power output |
F02C 5/08
|
Gas-turbine plants characterised by the working fluid being generated by intermittent combustion the working fluid being generated in an internal-combustion gas generator of the positive-displacement type having essentially no mechanical power output the gas generator being of the free-piston type |
F02C 5/10
|
Gas-turbine plants characterised by the working fluid being generated by intermittent combustion the working fluid forming a resonating or oscillating gas column, i.e. the combustion chambers having no positively actuated valves, e.g. using Helmholtz effect |
F02C 5/11
|
Gas-turbine plants characterised by the working fluid being generated by intermittent combustion the working fluid forming a resonating or oscillating gas column, i.e. the combustion chambers having no positively actuated valves, e.g. using Helmholtz effect using valveless combustion chambers |
F02C 5/12
|
Gas-turbine plants characterised by the working fluid being generated by intermittent combustion the combustion chambers having inlet or outlet valves, e.g. Holzwarth gas-turbine plants |
F02C 6/00
|
Plural gas-turbine plants; Combinations of gas-turbine plants with other apparatus; Adaptations of gas-turbine plants for special use |
F02C 6/02
|
Plural gas-turbine plants having a common power output |
F02C 6/04
|
Gas-turbine plants providing heated or pressurised working fluid for other apparatus, e.g. without mechanical power output |
F02C 6/06
|
Gas-turbine plants providing heated or pressurised working fluid for other apparatus, e.g. without mechanical power output providing compressed gas |
F02C 6/08
|
Gas-turbine plants providing heated or pressurised working fluid for other apparatus, e.g. without mechanical power output providing compressed gas the gas being bled from the gas-turbine compressor |
F02C 6/10
|
Gas-turbine plants providing heated or pressurised working fluid for other apparatus, e.g. without mechanical power output supplying working fluid to a user, e.g. a chemical process, which returns working fluid to a turbine of the plant |
F02C 6/12
|
Turbochargers, i.e. plants for augmenting mechanical power output of internal-combustion piston engines by increase of charge pressure |
F02C 6/14
|
Gas-turbine plants having means for storing energy, e.g. for meeting peak loads |
F02C 6/16
|
Gas-turbine plants having means for storing energy, e.g. for meeting peak loads for storing compressed air |
F02C 6/18
|
Plural gas-turbine plants; Combinations of gas-turbine plants with other apparatus; Adaptations of gas-turbine plants for special use using the waste heat of gas-turbine plants outside the plants themselves, e.g. gas-turbine power heat plants |
F02C 6/20
|
Adaptations of gas-turbine plants for driving vehicles |
F02C 7/00
|
Features, component parts, details or accessories, not provided for in, or of interest apart from, groups ; Air intakes for jet-propulsion plants |
F02C 7/04
|
Air intakes for gas-turbine plants or jet-propulsion plants |
F02C 7/05
|
Air intakes for gas-turbine plants or jet-propulsion plants having provisions for obviating the penetration of damaging objects or particles |
F02C 7/06
|
Arrangement of bearings; Lubricating |
F02C 7/08
|
Heating air supply before combustion, e.g. by exhaust gases |
F02C 7/10
|
Heating air supply before combustion, e.g. by exhaust gases by means of regenerative heat-exchangers |
F02C 7/12
|
Cooling of plants |
F02C 7/14
|
Cooling of plants of fluids in the plant |
F02C 7/16
|
Cooling of plants characterised by cooling medium |
F02C 7/18
|
Cooling of plants characterised by cooling medium the medium being gaseous, e.g. air |
F02C 7/20
|
Mounting or supporting of plant; Accommodating heat expansion or creep |
F02C 7/22
|
Fuel supply systems |
F02C 7/24
|
Heat or noise insulation |
F02C 7/25
|
Fire protection or prevention |
F02C 7/26
|
Starting; Ignition |
F02C 7/27
|
Fluid drives |
F02C 7/28
|
Arrangement of seals |
F02C 7/30
|
Preventing corrosion in gas-swept spaces |
F02C 7/32
|
Arrangement, mounting, or driving, of auxiliaries |
F02C 7/36
|
Power transmission between the different shafts of the gas-turbine plant, or between the gas-turbine plant and the power user |
F02C 7/042
|
Air intakes for gas-turbine plants or jet-propulsion plants having variable geometry |
F02C 7/045
|
Air intakes for gas-turbine plants or jet-propulsion plants having provisions for noise suppression |
F02C 7/047
|
Heating to prevent icing |
F02C 7/052
|
Air intakes for gas-turbine plants or jet-propulsion plants having provisions for obviating the penetration of damaging objects or particles with dust-separation devices |
F02C 7/055
|
Air intakes for gas-turbine plants or jet-propulsion plants having provisions for obviating the penetration of damaging objects or particles with intake grids, screens or guards |
F02C 7/057
|
Control or regulation |
F02C 7/105
|
Heating air supply before combustion, e.g. by exhaust gases by means of regenerative heat-exchangers of the rotary type |
F02C 7/141
|
Cooling of plants of fluids in the plant of working fluid |
F02C 7/143
|
Cooling of plants of fluids in the plant of working fluid before or between the compressor stages |
F02C 7/224
|
Heating fuel before feeding to the burner |
F02C 7/228
|
Dividing fuel between various burners |
F02C 7/232
|
Fuel valves; Draining valves or systems |
F02C 7/236
|
Fuel delivery systems comprising two or more pumps |
F02C 7/262
|
Restarting after flame-out |
F02C 7/264
|
Ignition |
F02C 7/266
|
Electric |
F02C 7/268
|
Starting drives for the rotor |
F02C 7/272
|
Fluid drives generated by cartridges |
F02C 7/275
|
Mechanical drives |
F02C 7/277
|
Mechanical drives the starter being a turbine |
F02C 9/00
|
Controlling gas-turbine plants; Controlling fuel supply in air-breathing jet-propulsion plants |
F02C 9/16
|
Control of working fluid flow |
F02C 9/18
|
Control of working fluid flow by bleeding, by-passing or acting on variable working fluid interconnections between turbines or compressors or their stages |
F02C 9/20
|
Control of working fluid flow by adjusting vanes |
F02C 9/22
|
Control of working fluid flow by adjusting vanes by adjusting turbine vanes |
F02C 9/24
|
Control of the pressure level in closed cycles |
F02C 9/26
|
Control of fuel supply |
F02C 9/28
|
Regulating systems responsive to plant or ambient parameters, e.g. temperature, pressure, rotor speed |
F02C 9/30
|
Control of fuel supply characterised by variable fuel pump output |
F02C 9/32
|
Control of fuel supply characterised by throttling of fuel |
F02C 9/34
|
Joint control of separate flows to main and auxiliary burners |
F02C 9/36
|
Control of fuel supply characterised by returning of fuel to sump |
F02C 9/38
|
Control of fuel supply characterised by throttling and returning of fuel to sump |
F02C 9/40
|
Control of fuel supply specially adapted to the use of a special fuel or a plurality of fuels |
F02C 9/42
|
Control of fuel supply specially adapted for the control of two or more plants simultaneously |
F02C 9/44
|
Control of fuel supply responsive to the speed of aircraft, e.g. Mach number control, optimisation of fuel consumption |
F02C 9/46
|
Emergency fuel control |
F02C 9/48
|
Control of fuel supply conjointly with another control of the plant |
F02C 9/50
|
Control of fuel supply conjointly with another control of the plant with control of working fluid flow |
F02C 9/52
|
Control of fuel supply conjointly with another control of the plant with control of working fluid flow by bleeding or by-passing the working fluid |
F02C 9/54
|
Control of fuel supply conjointly with another control of the plant with control of working fluid flow by throttling the working fluid, by adjusting vanes |
F02C 9/56
|
Control of fuel supply conjointly with another control of the plant with power transmission control |
F02C 9/58
|
Control of fuel supply conjointly with another control of the plant with power transmission control with control of a variable-pitch propeller |